update: version

app.yaml

@@ -1,6 +1,6 @@
 id: t11
 name: t11
-version: 2.15.35
+version: 3.0.5
 author: t11
 icon: ''
 desc: t11
@@ -18,10 +18,6 @@ files:
   - laser_manager.py
   - logger_manager.py
   - main.py
-  - model_270139.cvimodel
-  - model_270139.mud
-  - model_270820.cvimodel
-  - model_270820.mud
   - model_285484.cvimodel
   - model_285484.mud
   - network.py

camera_manager.py

@@ -8,6 +8,15 @@ import threading
 import config
 from logger_manager import logger_manager
 
+_USE_CV = False
+try:
+    import cv2
+    import numpy as np
+    from maix import image as _maix_image
+    _USE_CV = True
+except ImportError:
+    pass
+
 
 class CameraManager:
     """相机管理器（单例）"""
@@ -57,6 +66,12 @@ class CameraManager:
         with self._camera_lock:
             if self._camera is None:
                 self._camera = camera.Camera(width, height)
+                v_flip = getattr(config, 'CAMERA_V_FLIP', False)
+                h_mirror = getattr(config, 'CAMERA_H_MIRROR', False)
+                if v_flip:
+                    self._camera.vflip(1)
+                if h_mirror:
+                    self._camera.hmirror(1)
         
         return self._camera
     
@@ -101,7 +116,8 @@ class CameraManager:
         with self._camera_lock:
             if self._camera is None:
                 self.init_camera()
-            return self._camera.read()
+            frame = self._camera.read()
+            return frame
     
     def show(self, image):
         """

config.py

@@ -15,6 +15,8 @@ LOCAL_FILENAME = APP_DIR + "/main_tmp.py"
 # 相机初始化分辨率（CameraManager / main.py 使用）
 CAMERA_WIDTH = 640
 CAMERA_HEIGHT = 480
+CAMERA_V_FLIP = True   # 摄像头垂直翻转（上下颠倒时设为 True）
+CAMERA_H_MIRROR = True  # 摄像头水平镜像（左右反了时设为 True）
 
 # 三角形检测缩图比例：默认按相机最长边缩到 1/2（性能更稳；可按需调整）
 # 取值范围建议 (0.25 ~ 1.0]；1.0 表示不缩图

main.py

@@ -136,6 +136,7 @@ def cmd_str():
     sync_system_time_from_4g()
 
     # 2.1 WiFi 热点配网兜底：仅当 STA 与 4G 均不可用时起 AP + HTTP；提交后删 /boot/wifi.ap、建 wifi.sta 并 reboot
+    _ota_pending_path = f"{config.APP_DIR}/ota_pending.json"
     try:
         from wifi_config_httpd import maybe_start_wifi_ap_fallback
 
@@ -286,12 +287,13 @@ def cmd_str():
         logger.info("系统准备完成...")
 
     last_adc_trigger = 0
+    trigger_adc_val = 0  # 触发时的气压值，气压需降回此值以下才能再次触发
     # 读取一次ADC初始值，防止开机时传感器已有压力导致误触发
+    enable_check = True
     try:
         last_adc_val = hardware_manager.adc_obj.read()
     except Exception:
         last_adc_val = 0
-    peak_adc_val = 0  # 当前周期内的压力峰值
     # 气压采样：减少日志频率（每 N 个点输出一条），避免 logger.debug 拖慢采样
     PRESSURE_BATCH_SIZE = 100
 
@@ -381,22 +383,16 @@ def cmd_str():
                 pressure_max = adc_val
             if len(pressure_buf) >= PRESSURE_BATCH_SIZE:
                 _flush_pressure_buf("batch")
-            # 峰值检测：压力从峰值下降时触发，确保捕获到最大冲击时刻
-            if adc_val > peak_adc_val:
-                peak_adc_val = adc_val  # 更新峰值
-            if (peak_adc_val >= config.ADC_TRIGGER_THRESHOLD
-                    and adc_val < peak_adc_val
-                    and last_adc_val >= peak_adc_val):
-                # 封顶后下降沿触发：peak是最大值，当前值开始下降，且上次值还在peak位置
+            # 突变增量检测：压力增量大于300时触发
+            # 触发后需等气压降到触发值以下才重新检测增量
+            if adc_val < trigger_adc_val :
+                enable_check = True
+            if (adc_val - last_adc_val) > 250 and enable_check:
                 hardware_manager.start_idle_timer()  # 重新计时
-                diff_ms = current_time - last_adc_trigger
-                if diff_ms < 3000:
-                    peak_adc_val = 0  # 去抖期间重置峰值
-                    time.sleep_ms(5)
-                    continue
                 last_adc_trigger = current_time
-                peak_adc_val = 0  # 触发后重置峰值
-                # 触发前先把缓存刷出来，避免波形被长耗时处理截断
+                trigger_adc_val = adc_val  # 记录触发时的气压值
+                last_adc_val = adc_val  # 更新基准值，防止连续增量误触发
+                enable_check = False
                 _flush_pressure_buf("before_trigger")
 
                 try:
@@ -415,7 +411,7 @@ def cmd_str():
                         camera_manager.show(camera_manager.read_frame())
                     except Exception as e:
                         pass
-                time.sleep_ms(5)
+                time.sleep_ms(1)
             last_adc_val = adc_val
 
         except Exception as e:

model_270139.mud

@@ -1,13 +0,0 @@
-
-[basic]
-type = cvimodel
-model = model_270139.cvimodel
-
-[extra]
-model_type = yolov5
-input_type = rgb
-mean = 0, 0, 0
-scale = 0.00392156862745098, 0.00392156862745098, 0.00392156862745098
-anchors = 10, 13, 16, 30, 33, 23, 30, 61, 62, 45, 59, 119, 116, 90, 156, 198, 373, 326
-labels = 黑三角和圆环
-

model_270820.mud

@@ -1,13 +0,0 @@
-
-[basic]
-type = cvimodel
-model = model_270820.cvimodel
-
-[extra]
-model_type = yolov5
-input_type = rgb
-mean = 0, 0, 0
-scale = 0.00392156862745098, 0.00392156862745098, 0.00392156862745098
-anchors = 10, 13, 16, 30, 33, 23, 30, 61, 62, 45, 59, 119, 116, 90, 156, 198, 373, 326
-labels = triangle
-

version.py

@@ -4,6 +4,6 @@
 应用版本号
 每次 OTA 更新时，只需要更新这个文件中的版本号
 """
-VERSION = '2.18.0'
+VERSION = '3.0.5'